Model DPM Digital Electronic Potential Meter
For Electrolysis, Corrosion and Cathodic Protection Testing
Designed for use by non-technical personnel including crews, servicemen, meter readers,
etc., but also suitable for the most experienced engineers and technicians.
20MΩ input resistance practically eliminates low potential
readings caused by resistance in the external circuit due to
contact resistance of the reference electrode. This condition
is frequently encountered in city work and in frozen ground.
- Low cost
- Rugged
- Easy-to-use
- Structure to earth potentials
- Auto-polarity + 2V and +20V ranges
- Low-battery display
- Optional electrode extension
DPM with optional 30" electrode extension (Cat. #16203)
Specifications:
- Large 1/2" LCD digits.
- Weatherproofed neoprene gasket.
- 20MΩ input resistance.
- Solid state impedance amplifier.
- Operates on one small 9V battery, low drain - long shelf
life, battery easily replaced and readily available.
- Automatic low-battery indication on display.
- Push one button to read +2V; push two buttons to read +20V while
taking reading.
- Digital readout: +1.999V or +19.99V.
- Filter eliminates errors caused by AC, up to 50 volts, 50/60 Hz.
- Operating temperature: -4oF to 185oF.
- Molded polycarbonate housing.
- Plastic carrying case with resilient padding.
- Modular construction.
- Weight: about 3 lbs.
- Size: 2 ½" deep x 10" long.
Ordering Information:
Model DPM (Cat. #4110) includes the potential meter, RE-5 CuSO4
electrode, one 8' test lead with hippo clip, one 8' test lead with
27-C test clip, battery, protective cover for meter, and carrying
case. Shipped assembled in case.
Warranty: Any part which fails during first year (except battery) will be
repaired or replaced by M. C. Miller Co., Inc. without charge, when returned to M. C.
Miller Co., Inc. prepaid and insured.