Coating Thickness Equipment

 

PosiPen®

Models A, B and C

Magnetic pull-off thickness gauge measures non-magnetic coatings such as paint, enamel, plating, & hot-dip galvanizing on steel. PosiPen® is manufactured in three versions:

  • PosiPen® Model A
    For measurements on surfaces with normal temperatures
    Cat. #66006A    Price $ 225.00
  • PosiPen® Model B
    For measurements on surfaces with extreme temperatures (between -150°F and +450°F or -100°C and +230°C)
    Cat. #66006B    Price $ 275.00
  • PosiPen® Model C
    Ferrite comparator
    Cat. #66006C    Price $ 225.00

PosiPen® can be placed with pin-point accuracy on any location of the part to be measured which other Gauges are not able to reach.

PosiPen® measures:

  • on hot surfaces
  • on small surfaces
  • in different positions

PosiPen® has a very small unique magnet and therefore can measure on extremely small parts, on peaks and valleys.

 

PosiPen® A and B have two scales, microns (metric) and mils (inch)

PosiPen - Coating thickness gage for non-destructive measurement of non-magnetic coatings (paint, enamel, plastic, galvanizing, metalizing, plating, & more) on steel
  • Range: 0.25 to 20 mils (inch)
  • Tolerance ±10% and 0.1 mil
  • Range: 5 to 500 microns (metric)
  • Tolerance ±10% and 2.5 microns
  • PosiPen® A and B are calibrated to NIST calibration standards