Gx Site Survey Data-logger
Cat. # 11250 Price $7,995.00
- Comes loaded with M. C. Miller’s Test Site Survey software application
- Integrates with ProActive, M. C. Miller’s corrosion control data management application
- Data-types are customizable for each of your test sites and each test site can be GPS position stamped
- High-resolution date/time stamped photos can be taken at your test sites during a route and recorded images are posted
directly to the ProActive database
- User Manual
Gx Pipeline Survey Data-logger
Cat. # 11275 Price $7,995.00
- Comes loaded with M. C. Miller’s Pipeline Survey software application for “Over-the-Pipe” Surveys:
- Close Interval Potential Surveys (CIPS or CIS)
- DCVG Surveys
- Combined (single-pass) DCVG/CIS Surveys
- Surface Potential Surveys
- Integrates with M. C. Miller’s survey accessory equipment (see Package Assembly Wizard )
- Integrates with ProActive, for pipeline survey data management, or can export data to Excel
- High-resolution date/time stamped photos can be integrated with your survey data
- User Manual
- More pictures
Both Gx kits include:
- Hard plastic carry case
- GPS Patch antenna
- A/C charger/adapter
- Vehicle charger
- USB adapter (A to mini-B)
- Serial cable
- USB host cable (A to mini-B)
- Two shrouded test leads
Optional Software Applications for the Gx Data-loggers:
The Gx Site Survey Data-logger and the Gx Pipeline Survey
Data-logger come loaded with the appropriate software. In addition, these data-loggers can be used to run other M. C.
Miller software applications that can be purchased separately.
- Gx Site Survey Application (for the Gx Pipeline Survey Data-logger)
Cat. #SFT131 Price: $1,500.00
- Gx Pipeline Survey Application (for the Gx Site Survey Data-logger)
Cat. #SFT132 Price: $1,500.00
- Gx Time Chart Recorder Application
Cat. #SFT133 Price: $1,500.00
Software support:
This is an optional item that is highly recommended and includes
access to the M. C. Miller Help Desk as well as software updates and enhancements as they are made available. This support is
included free-of-charge for the first year and can be purchased before the end of the first year of ownership of the data-logger
and then annually thereafter.
- User Support for the Gx Site Survey Application
Cat. #SFT131US Price: $225.00 per year
- User Support for the Gx Pipeline Survey Application
Cat. #SFT132US Price: $225.00 per year
- User Support for the Gx Time Chart Recorder Application
Cat #SFT133US Price: $225.00 per year
Gx Data-logger Extended Warranty Options:
Gx Data-loggers are covered under M.C. Miller’s
factory warranty for a period of 12 months from the date of shipment from the M. C. Miller factory to the customer.
At anytime during the first year of ownership of the Gx data-logger, the owner can elect to purchase an extended warranty on the
product. An extended warranty cannot be purchased beyond the first anniversary of the data-logger ship date. M. C. Miller offers
two types of extended warranties, the Gx GOLD and the Gx PLATINUM plans.
- Gx GOLD Extended Warranty - Cat. #11235 Price: $536.00
- Gx PLATINUM Extended Warranty - Cat. #11240 Price: $997.00
Please see the
“Terms and Conditions of the MCM Gx Data-logger Care Program” for details.
General specifications:
- Integrated M. C. Miller voltmeter
- Integrated GPS receiver (WAAS-enabled)
- Built-in 5MP digital camera with auto-focus and illumination
- Serial port available for an external GPS receiver connection, if required
- 320x240 pixel (3.5 inch) color LCD touch-screen (indoor/outdoor viewing)
- 55-key alphabetic-order keypad
- Windows CE 5.0 operating system
- Xscale processor (624MHz)
- 256MB SDRAM
- 2GB SD card (non-volatile memory for survey data storage)
- Serial (RS232) & USB outputs
- Bluetooth-enabled
- Two re-chargeable 2500mAh Li-Ion batteries (5000mAh total capacity) [40+ hours operation*] - both batteries are required for unit operation.
- IP67 rated (1 meter immersion)
- Satisfies MIL-STD-810F (wind-blown rain)
- Operating temp range:-4°F to 122 °F (-20°C to 50°C)
- Storage temp range (no battery): -4°F to 140°F (-20°C to 60°C)
- Dimensions: 12.5”x5.31”x2.31”
- Weight: 2.64 lbs
* For specific battery lifetime estimates see
below.
Key M. C. Miller Voltmeter Characteristics (for test site survey & pipeline survey work):
- High Voltage Isolation for Operator Safety
- Tested to 1kV steady-state/15kV transient voltage levels
(designed for higher voltage level isolation) – meets the IEC Standard for Category IV environments
- Analog Pre-Processing & Digital Signal Processing (DSP)
- accurate determination of On/Off pair values – voltmeter does not saturate even with superimposed AC signals
(up to 120V) and/or inductive spikes (up to 2kV) appearing at the input terminals
- Fast Response Channels (Ranges) Available
- 80ms response time in combination with high input impedance values (up to 400MΩ) – accurate On/Off pair readings during
fast cycle current interruption, even under high source resistance conditions
Voltmeter range, display resolution and accuracy specifications
for the Gx Data-logger
Channel, Input Impedance & Response Time (to 99% of final value)
| Range |
Display Resolution |
Accuracy(% reading value) |
| VDC |
|
|
| 40mVDC, 10MΩ, 80ms |
0.01mV |
±0.2% ±0.08mV |
| 400mVDC, 10MΩ, 80ms |
0.1mV |
±0.2% ±0.6mV |
| 5.7VDC, 400MΩ , 80ms |
0.001V |
±0.2% ±0.004V |
| 40VDC, 75MΩ , 80ms |
0.01V |
±0.2% ±0.04V |
| 57VDC, 75MΩ, 2ms |
0.01V |
±0.2% ±0.04V |
| 57VDC, 400MΩ, 50ms |
0.01V |
±0.2% ±0.04V |
| 400VDC, 75MΩ, 80ms |
0.1V |
±0.2% ±0.4V |
| 570VDC, 75MΩ, 2ms |
0.1V |
±0.2% ±0.4V |
| VAC |
|
|
| 40VAC, 75MΩ, 1.35s |
0.01V |
±1.0% ±0.06V |
| 400VAC, 75MΩ, 1.35s |
0.1V |
±1.0% ±0.6V |
| AC range specifications valid over 10-1000Hz frequency range and 5-100% of full scale range |
Battery life estimates(hours):
| Backlight Intensity Level |
5% |
50% |
100% |
| No Applications Running |
43.8 |
26.6 |
19.0 |
MCM Survey Application Running
(Voltmeter and GPS Receiver Active) |
23.0 |
16.7 |
13.3 |