Mark Miller Memorial Scholarship Fund

SMT Services

M.C. Miller now offers Surface Mount services. We can build PCB assemblies to your specifications in small to medium runs for both production and prototyping. Visit smt.mcmiller.com for more information or to request a qoute.

G1 Owners

Do you own an older G1? Tired of waiting for the OEM GPS unit to sync with satellites? M.C. Miller now offers a GPS upgrade that decreases satellite synchronization time to under 29 seconds from a cold start. Call us for more details.

Meters

LC-4 Handheld Voltmeter

LC-4 Digital Multimeter
Cat. #5203
Price $700.00
Pick up a Model LC-4 and have these features in the palm of your hand:
  • DC volts for IR drop, potential & rectifier readings
  • AC volts for potential & rectifier readings
  • Ohms for continuity & resistance testing
  • Selectable input resistance display "freeze" for instant off & coordinated tests
  • Optional plug-in shunt for current readings
  • Heavy duty carrying case
General

Model LC-4 is the first hand-held voltmeter to include a number of special features which facilitate corrosion and cathodic protection testing on underground structures. It is designed for field testing under almost any environmental conditions. Sealed Mil Spec. switches, sealed windows, a gasketed case and a printed circuit board with baked-on moisture and fungus resistant coating on both sides make this possible.

The large (0.5") display characters are easy to read under both high and low lighting conditions and function over a wide temperature range with very little drain on the battery.

The LC-4 is recommended for potential surveys, side drain measurements, surface potential surveys, IR drop measurements, checking both the AC and DC circuits of rectifiers, checking for stray or hazardous AC potentials, and checking galvanic anodes. DC current measurements require the use of an optional plug-in shunt (0-20 Amp).

The selectable input resistance feature permits detection of high resistance in the external circuit and elimination of resulting errors in virtually all cases.

The push-to-hold-reading button freezes the display at any desired time, which makes the meter usable in many areas having varying stray currents. It is also useful when conducting instant-off and coordinated tests.


Specifications
Logic CMOS, crystal controlled timing.
Display Liquid crystal, 3 1/2 digits, 0.5" high.
DC Volt Range 0 - 20 mV (.0l mV resolution)
0 - 200 mV (.l mV resolution)
0 - 2 V (l mV resolution)
0 - 200 V (.l V resolution)
AC Volt Range 0 - 600 V (l V resolution)
Resistance Range 0-200 Ohms (.1 Ohm resolution)
DC Current Range Using optional .001 Ohm LC Shunt: 0-20 A
(.01 A resolution)
Accuracy DCV: 1% of reading +1 digit.
ACV: 3% of reading +1 digit
Ohms: 2% of reading +1 digit.
AC Rejection
@ 50/60/400 Hz		 20 mV range: 20 mV AC
200 mV range: 5 VAC
2 V range: 120 VAC
200 V range: 600 VAC
DC Rejection 600 VAC range: 600 VDC
Zero Automatic
Decimal Point Automatic; set by range switch.
Polarity Automatic; negative symbol displayed, positive assumed.
Input Resistance 20 mV range; 1000 Ohms. All other DCV
ranges are switch selectable
(10, 25, 50, 100, 200 megohms).
Operating Temperature +8oF to +176oF (-14oC to +80oC).
Battery One 9V alkaline recommended.
Dimensions 6-1/8 x 3-5/8 x 1-3/4" overall (15 x 8 x 4.5 cm)
Weight: 11 oz. approx. (0.312 kg.)

Accessories for LC Series Voltmeters

LC-4 with case and Reference Guide
Spare Carrying Case

Made of heavy, water resistant simulated leather, this carrying case leaves your hands free to perform tests. A quick opening snap permits ready access to the instrument, and a belt loop is included with a snap fastener.

Cat. #5406
Price $60.00

 

 

Electrode Extension Adapter
(shown with optional electrode and 30" Intermediate Extension, Cat.#16203, attached.)

Designed to save effort (and your back) as well as to protect you from snakes and poison ivy, the MCM electrode extension adapter firmly mates with the base of the meter by the use of Velcro® pads. The base has a threaded socket which connects to either input terminal by means of a test lead pigtail with a banana plug. Any MCM intermediate electrode extension can be screwed into the socket.

Cat. #5701
Price $50.00

 

 

Telescoping Extensions


Ball Handle Extension
Cat. #16281

Cane Handle Extension
Cat. #16282

 

Designed to access those hard to reach places, the telescoping extension adjusts to the user's height and the twist cam lock feature secures the cane at any length between 32 and 48 inches.Any MCM electrode can be attached to fit the user's application (electrodes are not included)

Price $85.00 each

 

External Shunt


Price $75.00 each
Two shunts which plug directly into the 20 mV range of the LC-4 Meter are available:
  • 0.001Ω/ 50A/ 1mV = 1A (measure up to 20A on the 20mV range).    Cat. #5803
  • 0.1Ω/ 2A/ 100mV= 1A (measure up to 200mA on the 20mV range).    Cat. #5800