JPL100 GPS Current Interrupter
All new M.C.Miller meters include a Calibration Certificate.
- Interrupts up to 100 Amperes at ±170 VDC and 100 Amperes at 120VAC
- Cool to the touch - even at full rated current
- Can be sync with JR-1, JR-2, TH100A units
- Can provide immediate or scheduled interruption operations
- Compact, lightweight, sturdy construction
- WPAN enabled
- Configuration is through a user-friendly touch-enabled Android™ application.
- Contains high accuracy real time clock for best accuracy.
- On/Off cycle time: 0.05 second to 65 seconds in millisecond increments.
- GPS Antenna can be rotated and re-positioned, and is also removable.
- Powered by 4 "D" cell Alkaline 1.5v batteries
- New JPL100 100Amp GPS Current Interrupter
- Green 6 Foot (1.83 m) Straight Lead with 27-C (40 Amp) Clip (Item #33910)
- Dual 100 amp Power Cable (Item #SUB577)
- GPS Antenna
- Sync Cable Assembly (Item #12845)
This unit has all the functionality of a 100 Amp GPS current interrupter plus the convenience of WPAN programmability, as well as M.C.Miller's high quality components and manufacturing standards at a price that will make the office budget happy.
Please Note: An Android device is required to configure the unit. Download the JPL100 Configuration Application found on the Downloads tab with your Android device and connect to the unit via WPAN technology.
- Accuracy: On/Off cycles’ accuracy to 1 millisecond, continuing operation shifts less than half second a day
- Relay: Solid State
- Battery: (4) Standard "D" cell alkaline 1.5v batteries
- Estimated Battery Life: 300hrs @ 4s On/Off Cycle
- Temperature Range: Based on alkaline batteries @ 0°F to 131°F (-18°C to 55°C)
- Rating: IP65 rated
- Interrupting Capacity: 100 amps @ 150 V DC
- Max Input Voltage (DC): +/- 170 VDC
- Max Input Current (DC): 100 Amperes
- Max Input Voltage (AC): 120 VAC
- Max Input Current (AC): 100 Amperes
- Ambient Operating Temp:-40°C to +80°C
- Length: 12.0 inches (30.48 cm)
- Width: 6.0 inches (15.24 cm)
- Height: 4.0 inches (10.16 cm)
- Weight: 4.9 Lb (2.22 kg)
- Auto Turn-On: Main power is manually switched ON/OFF, operation schedule can be pre-set while power is on. Auto Start/Stop based on the pre-set schedule (Start/Stop dates, Start/Stop time)
- Synchronize Compatibility: JR-1, JR-2, Cronos, TH100A
- Management Interface: Android™ WPAN Application
- Android version 5.1.1 or higher (Lollipop)
- Recommended: Android version 6.0 (Marshmallow) or higher
- Device screen size of 5" (17.78cm) or larger
Simply tap on one of the links below using your tablet. Then, select Install and Allow if prompted to do so.
- Current Interrupter Configuration Application, ver 2.6.2, 10-13-2022
Getting to know the JPL100: